Question: How Much Does It Cost To Surface A Driveway?

What is the cheapest way to surface a driveway?

Gravel and Stones A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound..

How much does Sealcoating a driveway cost?

In the United States, the average cost for materials and labor to sealcoat asphalt is $0.17 to $0.24 per square foot. For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating.

How can I fix a cheap muddy driveway?

The Best Solution for a Muddy Driveway The best way to fix a muddy driveway is with TRUEGRID permeable pavers. The permeable pavers offered by TRUEGRID are an inexpensive, durable, effective, and long-lasting solution to muddy driveways.

How much does it cost to pave a 100 foot driveway?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

Is it cheaper to do asphalt or concrete a driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.

How often should a driveway be resurfaced?

every three yearsAsphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing.

When should I resurface my driveway?

Shallow cracks and constant patching may signal it’s time to resurface your driveway. Resurfacing is when you replace the top layer of asphalt with a fresh layer. Resurfacing helps extend the life of your driveway for another eight to 15 years.

Can you pave over existing driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. … An existing asphalt surface is the best base for new asphalt. Damaged or troubled areas are repaired before the installation of asphalt.

Does paving driveway increase home value?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. … While they increase the value of your home, a nice paved driveway can also help sell your home FASTER. And who doesn’t want to do that!

How long does a paved driveway last?

12 to 20 yearsAsphalt driveways typically last 12 to 20 years, depending on the quality of the installation, the climate, the usage they get, and how well they have been maintained. Like most everything else, the better care you take of your asphalt driveway, the longer it will remain in service.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

How much does resurfacing a driveway cost?

Expect to pay about $2.25 per square foot for basic driveway resurfacing. So a typical residential driveway of 750 square feet would cost about $1,687. If you want patterns or colors, you need to pay more, around $4 to $8 per square foot, or $3,000 to $6,000 for a 750-square-foot driveway.

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,722 on average, with a typical range between $2,930 and $6,561. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

Does a driveway add value?

You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property’s value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.

What is best surface for a driveway?

Concrete is a hard-wearing, long-lasting driveway materials choice and can be finished in a surprising number of ways, as the poured variety can be stamped with patterns. Concrete has a very long lifespan of four decades or more.

Can my driveway be resurfaced?

Resurfacing includes replacing the top layer of concrete or asphalt instead of tearing it up completely or patching small portions. This will give your driveway a new look but will cost less than a complete replacement.

What is the best low maintenance driveway?

Low-Maintenance Driveway OptionsPaving Stones. Paving stones are known to last up to a full century if properly laid. … Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. … Plastic Permeable Pavers.

What does a new driveway cost?

The cost to put in a new driveway averages $4,424, with a typical range between $2,379 and $6,478. For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area.